Mirror copy shapes (parts, holes, blocks, etc.)

Mirror copy shapes (parts, holes, blocks, etc.)

Explain how to mirror the shape.
Target object:
  1. Parts
  2. Features (holes, blocks, etc.)
  3. Assembly
There are two ways to "Mirror" operation.

Mirror Feature command

[1] Set the "Selection Filter" in the lower right corner of the IRONCAD screen to "IntelliShape".


[2] Select the shapes (parts, holes, blocks, etc.) to mirror.

[3] Click "Mirror Feature" in the "Transform" Group of "Feature" tab.

[4] Specifies the plane/point to mirror. *In the example in the image, specify the Center Point of the edge


[5] Click "OK".
Notes
"Mirror Feature" command is only available for IntelliShape models.
[1] Select the shapes (parts, holes, blocks, etc.) to mirror.

[2] Launch "TriBall".

[3] Click the Space key on your keyboard to go to where you want to mirror TriBall.
(TriBall color is white.)


[4] Click the Space key again.
(TriBall color is blue.)

[5] Right-click the short "Direction Handle".


[6] Click [Copy] (or {Link]) of [Mirror].
Notes
Mirror Copy of TriBall can be used for all objects.

Please refer to the video below.


Ic-083

    • Related Articles

    • Mirror copy the Body of the structure part

      Learn how to mirror the Body of a structure part. Procedures Select the [1] Feature tab → Mirror. If you want to mirror the Body of a structure part, TriBall cannot. [2] Select the structure part to run Mirror. If the structure part is set to Active, ...

    • Set Parts as Active

      When setting a part as active means currently modeled part only editable. This prevents accidental modifications to other parts. How to: Select the part you want to activate, then right-click and choose [Set as active] from the context menu. The name ...

    • It changes line type of some parts.

      It changes line type of some In the 2D assembly drawing, in addition to the main design data, it want to may be expressed in line types (imagination lines) other than solid lines. Using the 3D Configuration function, it can project to be divided into ...

    • Create Sheet Metal Parts from Solid Parts

      This section explains how to create sheet metal parts from solid parts either imported via intermediate files or created directly in IRONCAD. Shapes Convertible to Sheet Metal Parts Example: Shapes Convertible to Sheet Metal Parts. Both solid parts ...

    • Edit Brep parts

      When you obtain 3D data for purchased components from other 3D model download services, you can import them into IRONCAD using compatible file extensions. For solid parts, you can perform direct editing and modifications using IRONCAD’s Direct ...