Add and edit sheet metal stock

Add and edit sheet metal stock

Learn how to add and edit a sheet metal stock.
Add and edit the sheet metal stock from Optional → Sheet Metal → Stock.

Add stock

[1] Select Add while selecting the location of the stock you want to add.

Notes
It will be added under the selected stock.

[2] Enter any property in the dialog that appears.

Edit Stock

[1] Select Edit while selecting the stock you want to edit.


[2] Change any property in the dialog that appears.

Addition of materials

If you want to create a new material that is not in Default Stock, you need to edit the referenced text file directly.
The referenced text file is displayed in Sheet Metal Stock Data File at the bottom of the Optional → Sheet Metal → Stock screen.


In the case of default settings, it is saved in the following folder.
C:\Users\\AppData\Local\IronCAD\\ja-JP\SheetMetMetal\Stocktbl.TXT
WarningWhen editing a text file, exit IRONCAD.

[1] [Stockbl.Open the txt.


[2] Copy [Begin StockTable] to [End StockTable] from other materials.
Example: The SPCC.


[3] In the position of the material you want to add.Paste it.

Notes
[Begin Stocktable][End StockTable] should be empty up and down one line each.

[4] Change [TableID] and [Title].
TableID: Any stringTitle: Name of Material


[5] Save the text file.
[6] Launch IRONCAD and make sure the changes are reflected.
Warning
Each stock in the created material remains the original settings of the copy. Edit to any property in Edit.
I edited it again [Stockbl.txt] Please backup separately.


    • Related Articles

    • Collaborate with KeyShot

      KeyShot requires a separate KeyShot for IronCAD license. Learn how to view data created with IRONCAD in KeyShot products. Confirmation: Confirmation of license Check the KeyShot license you purchased with IRONCAD. How to Verify a License (Standalone) ...

    • Show file attribute items in the file list

      Explain how to display the file attribute information given to the file in the column of the file list. Items that are not in the default file list can be displayed. File attribute information is by entering the information you want to give to the ...

    • Create a fan model

      Fan-shaped models can be created in the Spin Wizard or Extrusion Wizard. The operation procedure is as follows: How to create in the Spin Wizard [1] Run the Feature tab → Feature Group → Spin Wizard and draw a rectangle. [2] Double-click the corner ...

    • Circular arrangement of holes centered on the reference axis

      The Structure Parts tab → Data M has a Reference Axis. Reference axes can be created and used in a variety of operations to maintain relevance to axes, such as circular array axes and rotating axes. Explain the operation of ring arranging holes ...

    • Open data created in a newer version than the IRONCAD you are using

      Data created and saved in the new version cannot be opened in the old version. See also:Beware of Upgrades - IRONCAD User's Guide Again,IRONCAD 3D data cannot be stored in older versions of IRONCAD. If you want to open data created with a new version ...