Create a base table that can change height

Create a base table that can change height

Explain how to create a base table that can be easily changed height using placement restraints and parameters.
Design time can also be reduced by registering catalogs and diverting them to other facilities.

Please refer to the video below.
from IC-015

    • Related Articles

    • Create a Base Frame Using Square Pipes

      This section explains how to create a base frame using square pipes. Please note that this is just one example of a possible method—there are various other ways to create it, so consider this for reference. Customers with an active support ...

    • Change the Frame Type of Part Numbers

      This section explains how to change the shape of part numbers. Part number shapes are configured in the Bill of Materials (BOM) input screen. Procedure: [1] After projecting the drawing, click [Import 3D BOM] in the [3D Interface] tab. Since part ...

    • Set Insert Joint Point and create continuous pipes and mounts

      This section explains how to use the [Attachment Point] function to build continuous pipe structures or equipment base frames in IRONCAD. In piping design and equipment base structures, it is common to use multiple sections of the same type of round ...

    • Changing the Bend Angle for Specific Sketch Bends

      This section explains how to modify the bend angles of sheet metal parts created using the [Create Sketch Bend] feature. While the [Set Bend Angle] command allows you to set the bend angle for each bend line at the time of creating the sketch bend, ...

    • Create "Block"

      This section explains how to create Block parts in CAXA Draft. Block parts allow you to register frequently used lines or shapes as blocks so that they can be easily inserted into drawings. By registering items such as bolts, pins, and annotations as ...