Create a tapered hole in Custom Holes in the Tools catalog
This section explains how to create a tapered hole using the [Custom Hole] command from the [Tool] Catalog.
Check [Taper] and set each infomation.
Check [Taper] and set each infomation.
Please refer to the video below.
IC-068
Related Articles
Create tapered screws with pie holes and schematic screw mountains
This section explains how to create a tapered internal thread. IRONCAD is a CAD system that allows efficient modeling by utilizing items from the standard catalog. Tapered internal threads can also be easily created by using [Cut Pie] from the ...Create tapered screw holes
This section explains how to create a tapered threaded hole using the [Custom Hole] command in the [Feature] tab. Procedure: [1] Click [Custom Hole] in the [Feature] tab. [2] Select face. [3] Select [Taper Thread Hole] in the [Type] menu. [4] Set ...Creating a Bolt Hole Using [Custom Hole]
This section explains how to create a bolt hole using the [Custom Hole] feature found in the [Feature] tab. Procedure: [1] Go to the [Feature] tab and click [Custom Hole]. [2] Select the target part and click on the desired placement point. [3] In ...Create dimensions with the "Hole Dimension" command
Explain how to create dimensions with the "Hole Dimension" on the "3D Interface" tab. The Hole Dimension command displays dimensions on holes projected onto CAXA Draft based on hole information created with 3D data. Examples of projections linked to ...Create the center line of arc long holes
Since the center line of arc long holes is not created automatically, we will explain how to create it manually. "Center Line of Circle Array" command on the "Common" tab. Procedures: [1] Double-click the projection diagram, move to the block's place ...