JIS Standards Cannot Be Selected
In some cases, JIS standards may not be displayed in the [ICM Mech] catalog under categories such as [Steel Materials].
Cause:
The standards replacement process has not been performed.
Solution:
If the replacement process is executed while IRONCAD is running, the system may become unstable.
Please ensure that IRONCAD is closed before performing the following steps.
Procedure:
[1] Open the folder [icMechanical_Standard_20xxxxxx] included with the installer.
The folder name may vary depending on the version. Please use the folder packaged with the installer for your version.
[2] Double-click [Standard_Replace.vbs] to execute the script.
[3] When the dialog “Start importing standards.” appears, click [OK].
[4] Once the import process is complete, the dialog “The standards have been successfully imported.” will appear. Click [OK].
[5] The JIS standards provided by our company will now be applied.
Related Articles
Parts from Different Standards Appear in Created Piping
Applicable Product and Version: IRONCAD 2025 Cause: Normally, piping created using a selected standard cannot have parts from a different standard attached. However, in rare cases, parts from another standard may appear in the piping. These parts ...How to Check the Save Location of a Catalog in Use
In IRONCAD, you can register your preferred items in a catalog and create catalogs as needed. These catalogs can be saved in any location and used later. If you forget where a catalog has been saved, follow the steps below to check its location. ...IGES or STEP cannot open
If the intermediate file cannot be opened, the following causes may be considered: The file is being opened using the Open command. The file size is large. The intermediate file data may not be in good condition. 1. Using [Open] command IGES (.Igs ...3D Model Appears Rough or Stutters (Flickering)
While using IRONCAD, you may encounter the following issues: The edges of 3D models appear rough and performance becomes sluggish (stuttering). The screen turns white during zoom operations. Reference: There's no snap. If the above procedure does not ...Scene Browser Has Disappeared
If the Scene Browser disappears during operation, it is possible that you accidentally right-clicked on an empty area of the ribbon bar and selected [Scene Browser], which toggles its visibility. Menu Displayed When Right-Clicking on the Ribbon Bar’s ...