Selecting All Smoothly Connected Faces with the Tab Key

This section explains how to select all smoothly connected faces or edges using the Tab key.

Procedure:

[1] From the Selection Filter at the bottom right of the screen, select [Face] or [Edge].

[2] Left-click on the desired face, then press the Tab key.

All smoothly connected faces will be selected.

This function also works when the [Edge] selection filter is active.

Please refer to the video below.

IC-136

• Related Articles

• Set Keyboard instruction

  This section explains how to use the [Keyboard instruction] feature in CAXA Draft to assign single-letter (single key) keyboard shortcuts.For example, you can assign L for lines, C for circles, and so on. Setting single-key shortcuts in CAXA Draft ...

• Collaborate with KeyShot

  KeyShot requires a separate KeyShot for IronCAD license. Learn how to view data created with IRONCAD in KeyShot products. Confirmation: Confirmation of license Check the KeyShot license you purchased with IRONCAD. How to Verify a License (Standalone) ...

• Adding Auxiliary Surface Symbols to Welding Symbols

  This section explains how to add auxiliary surface symbols to welding symbols in CAXA Draft. Procedure: [1] Click [Welding Symbol] in the [Annotation] tab. [2] Configure the Groove Symbol. By default, it is set to [None]. Select the desired symbol ...

• Ctrl + E key to change the display of hidden edges

  Since IRONCAD 2022, the switch operation of the edges display of the part has changed. Older versions (and earlier IRONCAD 2021) return to the original part state by pressing the Ctrl + E key twice. After IRONCAD 2022 has added "Shaded" pattern. ...

• Project the key groove in front

  This section explains how to project with the keyway facing forward. Use the "Direct View" command to set the keyway to face forward, and then enable [Orientation of 3D Scene] in the [Projection Drawing Output] screen of CAXA Draft. This will allow ...