Create Frame and Title Block and Template in CAXA

Learn how to create a template file that works with the property information of the 3D model.

Types of Templates

There are three types of CAXA Draft templates.

1. Title column template (.chd)
   You can register the title field.
   
2. Frame Template (.cfm)
   Only the frame can be registered by specifying the size.
   
3. Template (.and tpl)
   Standards, various style settings, layer information, etc. can be registered.
   It is also possible to register, including frame and title field.

Check the location of the template with CAXA Draft options.

When CAXA Draft is closed, IRONCAD options are opened.

Check the options with CAXA Draft open.

Preparation and Precautions

1. Frame Data (.Prepare the dxf, the standard.JisMake sure it is, and disassemble it if the frame or part of the title field is blocked.
   
2. Set the layout, style, and character style.
3. Be sure to match the base point of the frame and the base point of the title field in the same place.
   In addition, in CAXA Draft, the center of the frame is the origin position on the system.

Template in the title field (.chd)

Define the title field and file (.Save it to chd.
When you expand the plus mark of the optional Path → Template Location, you will see the user-defined and system-defined paths.
[See] You can change the storage location.

Frame Template (.cfm)

Define the frame and file (.Save to CFM).
When you expand the plus mark of the optional Path → Template Location, you will see the user-defined and system-defined paths.
[See] You can change the storage location.

Template (.and tpl)

[1] Load the saved frame template and the title field template to define and rearrange the attributes of the title field.

[2] File the edited title field (if necessary.Save to chd) overwrite or save to an alias.

[3] Create optional matching rules and enter parts and custom properties in 3D.

[4] After saving 3D, project it with CAXA to see if the title field reflects it.

[5] If you can confirm the reflection, delete all the drawings on the drawing, including the title field and frame.

Make sure there is no link in Edit Link in the 3D Interface tab.

[7] Again, read the saved frame and title fields to template the CAXA Draft file (.Save it to TPL.

[8] After saving to a template location, create CAXA Draft in New to display the template registered in My Templates.
Enable Settings as Default Template and use it.

For more information, visit the attachment [caxa-draft-template.and pdf]Please refer to.

• Related Articles

• Create a stand with a structure part

  Explain how to create a rack using structure parts. By creating with structure parts, you can create a stand that is easy to resize. Procedures [1] Right-click Block from the Shape catalog, drag and drop, and select Drop as a Structure Part. ...

• Create a rectangular pyramid

  [Shape] Catalog [PyramidsThen you can create a pyramid. However, rectangular pyramids cannot be created. Rectangular pyramids can be created in the Extrusion Wizard. The operation procedure is as follows: [1] Create a block in the Feature tab → ...

• Create partial fillet shape

  Explain how to create a partial fillet using "Cut Extrude". Procedures: [1] Drag and drop "Cut Extrude" on the Shape catalog at the center of the part edge. [2] Adjust the extrusion direction with TriBall to parallel to the edge. (Tune the arrows of ...

• Create fan-shaped model

  Fan-shaped models can be created in the Spin Wizard or Extrusion Wizard. In case of Spin Wizard [1] Click "Spin Wizard" on the Feature tab. [2] Select Plane Type, then draw sketch. Create a sketch with the Y axis pointing upward. Then click "Finish" ...

• Create a chuck opening and closing action

  Explain how to create a chuck movement to grab the workpiece. Even if the number of chuck points or more, if it is the same opening and closing operation, you can create a movement by copying one chuck in a circular array. Please refer to the ...