Create a stand with a structure part

Explain how to create a rack using structure parts.

By creating with structure parts, you can create a stand that is easy to resize.

Procedures

[1] Right-click Block from the Shape catalog, drag and drop, and select Drop as a Structure Part.

Right-click on the part and select Active Settings.

Change [3] Select Filter to Edge.

[4] Select to surround the block and right-click [3D Curve] on the selected edge.
※The dropped block is easy to operate later by right-clicking [Boto] in the scene browser → part → hidden.

Select the [5] Structure Parts tab → Insert Structure Frame.

Select the created 3D curve to Path.

They will use the right path and the right path.

Select the [7] Structure Parts tab → Trim/Combine Structure Frame.

[8] Use [8] to edit the overlapping parts of the [structure frame] inserted by [finding] and [trim].

[9] When the size of the original block is also changed, the size of the mount is also changed.

Please refer to the following operation video for details.

St-005

• Related Articles

• Set Insert Joint Point and create continuous pipes and mounts

  This section explains how to use the [Attachment Point] function to build continuous pipe structures or equipment base frames in IRONCAD. In piping design and equipment base structures, it is common to use multiple sections of the same type of round ...

• Create "Block"

  This section explains how to create Block parts in CAXA Draft. Block parts allow you to register frequently used lines or shapes as blocks so that they can be easily inserted into drawings. By registering items such as bolts, pins, and annotations as ...

• Mirror copy the Body of the structure part

  Learn how to mirror the Body of a structure part. Procedures Select the [1] Feature tab → Mirror. If you want to mirror the Body of a structure part, TriBall cannot. [2] Select the structure part to run Mirror. If the structure part is set to Active, ...

• Create Item Numbers (Balloons)

  This section explains how to create item numbers in CAXA Draft what infomation gotted from 3D data. To create part numbers based on 3D information, you must first perform [Import 3D Parts List]. 3D and linked - IRONCAD User's Guide Use [Create Item ...

• Create a Tension Spring

  This section explains how to create a tension spring. When using the Parasolid modeling kernel, it is not possible to create a tension spring without any gaps. A slight gap is required. Also, when placing a helix in space, the anchor point of the ...