Simplify your data with "Shrink Wrap" function

Simplify your data with "Shrink Wrap" function

The "Shrink wrap" function simplifies the entire data and some selected elements.
Simplified data and original data are linked.
By switching and using it improve the comfort of operation.

Application

  1. You want to reduce data capacity
  2. You want to simplify the external diagram (such as eliminating holes and flets)
  3. You want to efficiently edit only what you need.

This PDF document ※Japanese only

Please refer to the video below.
[Srink Wrap 1]

[Srink Wrap 2]


    • Related Articles

    • Edit Facet Data

      When you import intermediate files that contain faceted data into IRONCAD, they will be loaded as impossible editting data. (This is indicated by the red block icon.) Facet parts are not editable in their imported state. To make faceted data ...

    • Transfer data continuously from CADENAS for IronCAD

      This section explains how to open [CADENAS] for IronCAD from IRONCAD and continuously transfer model data to a scene. Procedure: [1] When the [Add-In Applications] window of [Add-Ins] tab appears, check [Parts by Cadenas] to enable it, then click ...

    • Wrap a Chain Around a Sprocket

      Use the [Positioning Constraints] command to create the shape of a chain wrapped around a sprocket: To connect each piece of the chain: use [Concentric] To wrap the chain around the sprocket: use both [Concentric] and [Distance] The placement ...

    • Edit Brep parts

      When you obtain 3D data for purchased components from other 3D model download services, you can import them into IRONCAD using compatible file extensions. For solid parts, you can perform direct editing and modifications using IRONCAD’s Direct ...

    • Creating Grooves on a Cylindrical Surface Using Wrap Emboss

      This section explains how to create evenly spaced radial grooves on the side surface of a cylindrical shape. Procedure: [1] Check the circumference length of the cylinder. [2] Go to the [Sketch] tab and create sketch line that match the circumference ...