設定
Create CAXA Draft Frame Title Field Template
Learn how to create a template file that works with the property information of the 3D model. Types of Templates There are three types of CAXA Draft templates. Title column template (.chd) You can register the title field. Frame Template (.cfm) Only ...
Change the standard for 2D drawings
Set-Standard (JIS, ANSI, GB) can be changed. It can also be changed if the standard applied to the template you create are wrong. When you change the standard, the tolerances and each symbol on the [Dimensions] tab will change. ※It applies from newly ...
IRONCAD Shuts Down When Using EXB to PDF
In IRONCAD’s 2D Draft (CAXA Draft), there have been cases where using [EXB To PDF (PNG, TIF, JPG).drv] causes IRONCAD to shut down unexpectedly. Solution: [1] Delete the folder that stores UI and other settings from the following location: In the ...
Set the 3D information in the title field
By default, the top part information on the 3D scene tree is output to the CAXA Draft title block. After creating the projection drawing, right-click on the title block and select "Set 3D Info" from the menu to change the display configuration or ...
Print with CAXA Print Tool
CAXA Draft provides two printing options. This section explains the use of the CAXA [Print Tool]. Menu → File → [Print] [Tools] tab → [Utilities] Group → Printing Tools The Print Tool is useful for printing multiple drawings on a single sheet or ...
Popular Articles
Display the candidate for the next command to use
You can automatically display candidates for the next command to use, depending on the object selection. (Quick Access Command) The menu is displayed near the mouse cursor, so you can smoothly migrate to the next operation. You can also customize it, ...
Installation Instructions
Install Procedure: [1] Double-click installer exe file. [2] After displaying the below, then click [Install]. [3] Check [I Accept], then click [Next]. [4] Uncheck [IronCAD Live Update] From the below, then click [Next]. [5] Select arbitrary standard, ...
Creating Motion with Pin/Slot Constraint
This section explains an example of how to create motion using the Pin/Slot constraint. The Pin/Slot constraint is used when a pin must move along an elongated hole (slot) or groove. In this example, we will demonstrate how to set up a pin on a fixed ...
Reverse Expansion Operation
In icVault, you can open the detailed view of a registered file from the file list and perform Expansion/Reverse Expansion to check which data the file is associated with. This section explains the procedure for performing Reverse Expansion from the ...
Adding Auxiliary Surface Symbols to Welding Symbols
This section explains how to add auxiliary surface symbols to welding symbols in CAXA Draft. Procedure: [1] Click [Welding Symbol] in the [Annotation] tab. [2] Configure the Groove Symbol. By default, it is set to [None]. Select the desired symbol ...