CAXA Draft
Text (value) is not displayed in the BOM list
On the input screen of the BOM list, if the information is entered but not displayed in the part list, the following causes may be considered. Text Height in [Text Style] is set to 0(zero) Solutions You can display it by editing Text Style. ...
CAXA Draft Becomes Unstable
CAXA Draft may behave abnormally or operate in an unstable manner. When there is data containing errors in intermediate files, surfaces, or solids, the software may exhibit the following types of instability: Projected views do not update Dimensions ...
A Content Change Message Appears When Opening a Drawing Template
By creating a drawing frame template in CAXA Draft and registering it for standard use, you can quickly create drawings using the same template. If the drawing frame used in the template has a history of projecting 3D data, a drawing update message ...
Scale in Title Block Not Updating
Normally, when changing the scale from the layout settings, the scale attribute in the title block is updated. However, there are cases where the drawing scale does not update as expected. Cause: No matching rule has been set for the scale. Solution: ...
CAXA Draft Symbol Garbling and GDT Error Messages
Symbol garbling or GDT error messages may appear in CAXA Draft due to issues with font linking between Windows fonts and the fonts stored in the [Font] folder of CAXA Draft. These issues can occur after a Windows update, changes in the PC ...
Popular Articles
Installation Instructions
Install Procedure: [1] Double-click installer exe file. [2] After displaying the below, then click [Install]. [3] Check [I Accept], then click [Next]. [4] Uncheck [IronCAD Live Update] From the below, then click [Next]. [5] Select arbitrary standard, ...
Reverse Expansion Operation
In icVault, you can open the detailed view of a registered file from the file list and perform Expansion/Reverse Expansion to check which data the file is associated with. This section explains the procedure for performing Reverse Expansion from the ...
Adding Auxiliary Surface Symbols to Welding Symbols
This section explains how to add auxiliary surface symbols to welding symbols in CAXA Draft. Procedure: [1] Click [Welding Symbol] in the [Annotation] tab. [2] Configure the Groove Symbol. By default, it is set to [None]. Select the desired symbol ...
Setting a [Catalog Item] in Attachment Point
This section explains how to set a [Catalog Item] in an Attachment Point. By configuring a [Catalog Item], when a group is dropped from the catalog, the part specified under the [Catalog Item] name will be automatically placed at the attachment ...
CAXA Draft Symbol Garbling and GDT Error Messages
Symbol garbling or GDT error messages may appear in CAXA Draft due to issues with font linking between Windows fonts and the fonts stored in the [Font] folder of CAXA Draft. These issues can occur after a Windows update, changes in the PC ...