部品表
Reflect the Total Weight from the Parts List to the Title Block
Explain how to reflect the total weight of the part list in the title field. This section explains how to reflect the total weight from the parts list into the title block. The parts list has a feature for setting the total weight. Using this ...
Change the Frame Type of Part Numbers
This section explains how to change the shape of part numbers. Part number shapes are configured in the Bill of Materials (BOM) input screen. Procedure: [1] After projecting the drawing, click [Import 3D BOM] in the [3D Interface] tab. Since part ...
Reflect 3D Custom Property Information in the Parts List
This section explains how to reflect 3D custom property information in the parts list in CAXA Draft. [1] In the CAXA Draft Options, select [System] from the list on the left side. Click [Set Matching Rule] on the right side. [2] In the Matching Rules ...
Grouping part numbers (balloons)
Item numbers (balloons) can be grouped. Procedures: [1] Create a item number with [Manual Generate item No.] on the [3D Interface] tab. [2] Select the Item Numbers you want to group on the BOM list. [3] Click on the item number created in [1] to ...
Set the part list into multiple columns
This section explains how to split a parts list in a 2D draft (CAXA Draft) into multiple units. Procedure: [1] Click [Import 3D BOM] in the [3D Interface] tab. [2] Go to the [Paper] tab, then click [Break]. [3] In the instance menu under item 1, ...
Export [Bill of Materials] to Excel
This section explains how to export a bill of materials (BOM) created in CAXA Draft to Excel file. Procedure: [1] Open a new Excel file. [2] Save the file in Excel Workbook format (e.g., on your desktop). [3] In CAXA Draft, select [Database] in the ...
Re-import BOM message appears when creating Item No. (balloon)
When outputting an assembly as a part in the CAXA Draft, if you see a re-import message for the part list, the following causes may be considered: "Include this shape in BOM" of 3D Properties is not checked. It is set to "Treat as part" in the ...
Popular Articles
Installation Instructions
Install Procedure: [1] Double-click installer exe file. [2] After displaying the below, then click [Install]. [3] Check [I Accept], then click [Next]. [4] Uncheck [IronCAD Live Update] From the below, then click [Next]. [5] Select arbitrary standard, ...
Reverse Expansion Operation
In icVault, you can open the detailed view of a registered file from the file list and perform Expansion/Reverse Expansion to check which data the file is associated with. This section explains the procedure for performing Reverse Expansion from the ...
Adding Auxiliary Surface Symbols to Welding Symbols
This section explains how to add auxiliary surface symbols to welding symbols in CAXA Draft. Procedure: [1] Click [Welding Symbol] in the [Annotation] tab. [2] Configure the Groove Symbol. By default, it is set to [None]. Select the desired symbol ...
Setting a [Catalog Item] in Attachment Point
This section explains how to set a [Catalog Item] in an Attachment Point. By configuring a [Catalog Item], when a group is dropped from the catalog, the part specified under the [Catalog Item] name will be automatically placed at the attachment ...
CAXA Draft Symbol Garbling and GDT Error Messages
Symbol garbling or GDT error messages may appear in CAXA Draft due to issues with font linking between Windows fonts and the fonts stored in the [Font] folder of CAXA Draft. These issues can occur after a Windows update, changes in the PC ...