作図
Create the center line of arc long holes
Since the center line of arc long holes is not created automatically, we will explain how to create it manually. "Center Line of Circle Array" command on the "Common" tab. Procedures: [1] Double-click the projection diagram, move to the block's place ...
Create Revision Symbol
This guide explains how to create revision symbols in CAXA Draft. You will overlay a triangle shape and a number, combine them into a block, and then register it in the parts library. Procedure: [1] Go to the [Common] tab → select [Polygon] to create ...
[Surface Finish] Scale Adjustment
This section explains how to change the scale (size) of Surface Finish. To change the scale of the entire drawing [1] Click [Surface Finish] style in the [Annotation] tab. [2] Change the value of [Scale:]. To change the scale of part of the drawing ...
Create Center Line of Circle Array
This section explains how to create circular centerlines. It is used when you want to create centerlines pointing toward the center of a pitch circle, especially for multiple holes arranged in a circular pattern. Procedure: [1] Click [Center Line of ...
Create "Block"
This section explains how to create Block parts in CAXA Draft. Block parts allow you to register frequently used lines or shapes as blocks so that they can be easily inserted into drawings. By registering items such as bolts, pins, and annotations as ...
3D file linked to the projection map(.Check/change the ics.
This section explains how to check or change the 3D file (.ics) that is linked to a projected drawing in CAXA Draft. Checking the Linked File [1] Open the drawing file (.exb) in CAXA Draft. [2] Click [Edit Links] in the [3D Interface] tab. [3] The ...
Manually Changing Section View Label Symbols
In CAXA Draft, you can create section views from projection views linked to 3D models. When a section view is created, a "label" is automatically assigned. By default, the label uses alphabetical letters in sequence (A, B, C, ...). However, if a ...
Creating Hatching in Projected Views from 3D
This section explains how to apply custom hatching patterns to each part in a projected view created from 3D data in CAXA Draft. Procedure: [1] Click [Standard View], then move [Options] tab. Set the [Hatch Settings] for each part or assembly. After ...
Creating a Surface Texture Symbol
This section explains how to create a surface texture symbol in a drawing using CAXA Draft. The surface texture symbol is used to indicate surface roughness, typically on reference planes or mounting surfaces such as brackets. CAXA Draft supports ...
Creating a Detail View
This section explains how to create a [Detail View] by enlarging a specific area of a projection drawing in CAXA Draft. A detail view improves the clarity of drawing information by enlarging areas where lines overlap and make dimensioning difficult, ...
Create Item Numbers (Balloons)
This section explains how to create item numbers in CAXA Draft what infomation gotted from 3D data. To create part numbers based on 3D information, you must first perform [Import 3D Parts List]. 3D and linked - IRONCAD User's Guide Use [Create Item ...
Register in the parts library
By defining shapes created by CAXA Draft into Part Library, it can be inserted into other drawings and reused. Procedure: [1] Click [Define] on the [Insert] tab. [2] Select the shape. After right-click or enter to complete the selection. [3] Select ...
Edit Hatch of Section View with linked 3D Data
This section explains how to edit the hatchings in a Section View that has been projected from 3D data in CAXA DRAFT. Procedure: [1] Go to the [3D Interface] tab, then click [Edit Hatch]. [2] Select the hatching you want to edit. If there are ...
Creating an Auto List
This section explains how to create an [Auto list] as shown in the figure below, using CAXA Draft. Procedure: [1] Click [Create User Coordinate] in the [View] tab. Then you create coordinate system. [2] Click [Auto List] in the [Annotation] tab. [3] ...
Create a line with a distance specification
CAXA Draft explains how to draw a line division by specifying the length (distance) of a line. The procedure is as follows: [1] Click [Polyline] on the [Common] tab. [2] Click [Ortho] at the bottom right of the screen to enable it. [3] Move the mouse ...
Create Hatching in a Projected View
This section explains how to create manual Hatching in a projected view that is linked to a 3D drawing, independent of Section View. Procedure: [1] Right-click on the projected view and select [View Edit] or [View Edit In-place] to enter the ...
Color some of the projections
This section explains how to add color to a portion of a view. [1] After select view, click [View edit in-place] on right-click menu. You can also double-click the projection drawing. [2] From the [Draw], select [Fill], then left-click inside the ...
Copy with Base Point
After projecting a 3D shape into CAXA Draft, you can copy and use the projection drawing. Procedure: [1] If you want to copy the projection drawing by aligning a specific part of it to the target point, click [Copy with Base Point] in the [Common] ...
Creating "Note"
In 2D drawings, notes are used to provide supplementary information for manufactured parts that may be difficult for others to interpret based solely on the drawing, dimensions, or symbols. This section explains how to create drawing notes in CAXA ...
Creating a Section View of Surface model
This section explains how to create a section view of a surface model by CAXA Draft. Surface models are displayed with a yellow icon in the Scene Browser. If you attempt to create a projection view, you can use [Section View] in the [3D Interface] ...
Editing Hatch Patterns in CAXA Draft
This section explains how to edit hatch patterns created in CAXA Draft. Procedure: [1] Go to the [Drawing] tab and click [Hatch Edit]. [2] Modify the following properties: Pattern List: Select any pattern Settings: Set Scale and angle Border; Add or ...
Set the length of the center line
Learn how to set the length of the center line in CAXA Draft. The length of the center line can be changed with optional settings. The setup procedure is as follows: Select [1] Menu → Options. Change the value of [2] [3D interface] → [centerline ...
Set the auxiliary sign of the surface shape to the welding sign
by CAXA Draft.Explain how to set a surface shape auxiliary sign for welding sign. Procedures Select [1] Note tab → Welding Symbol. [2] Set the opening sign. Initially, it is None, so select any symbol from the list on the right. [3] [Open sign] in ...